Record your own voice (GentleVoice)
On the GentleVoice plan you record your voice once, and Stories and Routines can read in it.
Updated 2 min readWeb, iPhone, iPad and Android
On this page
Before you start
- You need the GentleVoice plan.
- You need to have agreed to AI generation. Your recording is sent out to build the voice.
- Set aside about a minute. You read a passage of about 150 words out loud.
Record your voice
Step 1: Open the voice hub
Open the Narration voice card in Personalization, for the person who should read in your voice.
Step 2: Choose Record your voice
It is in the Your voice part of the hub. The ready screen says "30 seconds minimum. About a minute is ideal."
Step 3: Read the passage
Read the on-screen passage at a natural pace. Past 30 seconds the screen says "Long enough. Keep going to about a minute." Recording stops on its own at two minutes.
Step 4: Wait for the sample
The app builds the voice and makes a short sample. It takes about a minute.
Step 5: Keep it, or record again
Play "Hear the sample". Keep it with "Perfect, use this voice". Record again throws away the voice you just made and starts over.
Who reads in your voice
- Finishing setup sets your voice for the person whose hub you started from. Everyone else keeps the voice they had until you change it in their own hub.
- There is one recorded voice per account. Any person can be set to use it.
- Your voice reads Stories and Routines. Token Boards have no audio.
If the recording does not go through
- A recording under 30 seconds says "That was a little short.", tells you how long you recorded and offers Record again.
- You cannot pause and pick up again. Record again starts over.
- If setup says the voice service is not available, the service did not respond. Use the retry.
If something goes wrong
You have reached the limit of 5 voice setups an hour. The screen says "You can set up to 5 voices an hour. This resets on its own, nothing's wrong." Wait a while and try again.
The voice is saved and works. Only the sample failed, and the button reads "Use this voice". In the hub you can try the play control again.
Microphone permission is off. The app shows how to turn it back on in your device settings.
Did this answer your question?
Still stuck?
Contact support and a person will answer.